The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares V35 V50 NTX 350 Monza Imola Brakes

Sort by Title

Sort by Price

Page 5 of 8

1 2 3 4 5 6 7 8

Brake Pads F05 Calipers EBC Sintered FA047HH

BRA19725 Fits V35 ALL, V50 ALL, V65 ALL, V75, 750 Targa, Strada 750, Daytona ALL, 1100 Sport ALL, Centauro, V11 Sport, Nevada 750 (1991-2002), Nevada 350, 750 SP, 750T

Dimensions:
8mm overall thickness

Pair of EBC FA047 sintered brake pads for Brembo F05 (P5) and Grimeca calipers for extra braking power

Fits Nevada up until frame no. LK112433 Fits all calipers on pre 1993 models

part in stock 2 in stock

27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Front LH Caliper to Fixed Pipe

BRA14658 Fits V35 I, V50 I, V50 II

Dimensions:
69cm long

Front left hand brake pipe linking left hand caliper to fixed brakeline running to rear of bike

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

14658850-z 14658850 GU14658850 14 65 88 50
1465 8850 1465.8850 14.65.88.50

£38.00

INC VAT

£31.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Front LH Caliper to Fixed Pipe

BRA17886 Fits V35 II, V35 3, V35C, V50 3, V50C, V65C, V65 Florida, V75 PA, 750 Targa, Strada 750, 750 SP, Cali 3, Le Mans 2, Le Mans 3, Cali 1100

Dimensions:
74cm long

Brake pipe used for supplying front left hand caliper, screws directly into caliper

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

17658860-z 17658860 GU17658860 17 65 88 60
1765 8860 1765.8860 17.65.88.60

£32.80

INC VAT

£27.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Front RH Caliper to Front Manifold

BRA63657 Fits V35 II, V35C, V50C, V50 3, V65C

Dimensions:
50cm long

Front right hand brake pipe linking right hand caliper to manifold on front yoke

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

63657121-z 63657121 GU63657121 63 65 71 21
6365 7121 6365.7121 63.65.71.21

£30.50

INC VAT

£25.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Front RH Caliper to Master Cylinder

BRA19657 Fits V35 I, V50 I, V50 II

Dimensions:
81cm long

Front right hand brake pipe linking right hand caliper to undertank master cylinder. Check pipe length if your master cylinder has been upgraded to the V50 3 handlebar mounted type

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

19657100-z 19657100 GU19657100 19 65 71 00
1965 7100 1965.7100 19.65.71.00

£45.10

INC VAT

£37.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Rear Caliper to Linked Master Cylinder

BRA17657 Fits V35 I, V35 II, V50 I, V50 II, V50 3

Dimensions:
34.5cm long

Brake pipe linking rear caliper to linked system master cylinder

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

17657101-z 17657101 GU17657101 17 65 71 01
1765 7101 1765.7101 17.65.71.01

£36.00

INC VAT

£30.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brembo Pad Pin Kit F05

BRA39910 Fits V35, V50, V65, V75, Strada 750, Targa, 750, Nevada ALL (1993-1998)

Brembo pad pin kit for Brembo F05 (P5) calipers. Contains one long pin, two short and retaining spring

Brembo ref. 120280010, also used on some Laverdas . Front calipers only on Strada

part in stock 2 in stock

39659100 GU39659100 39 65 91 00
3965 9100 3965.9100 39.65.91.00

Also fits Benelli 250 TS

£19.50

INC VAT

£16.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Clevis Pin

GEA95265 Fits Convert, G5, Cali 2, Cali 3, Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, Spada ALL, T5, V35 ALL, V50 ALL, V65 ALL

Dimensions:
6mm OD

Clevis pin used in brake and gear change linkages, wears over time so well worth replacing on high mileage bikes

Replaces Guzzi refs. 95780265, 95780267, 95770265-Z, 95780265-Z. See BRA95227 for retaining split pin

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

95770265 GU95770265 95 77 02 65
9577 0265 9577.0265 95.77.02.65

£11.76

INC VAT

£9.80 EX VAT this is the price you will pay if you are ordering from outside the UK

Clipon Rubber

BRA39801 Fits 850/1000 ALL Models, V50

Dimensions:
18mm ID at wide end

Black 45 degree rubber cap for brakeline banjo union with master cylinder

Also used for cable exit from clip ons fitted to Le Mans 1 and Le Mans 2. Front brake light switch cover for ELA14959

part in stock 3 in stock

39663801 GU39663801 39 66 38 01
3966 3801 3966.3801 39.66.38.01

£4.20

INC VAT

£3.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Double Banjo Bolt M10 Stainless Steel Standard Thread

BRA01005 Fits V35 ALL, V50 ALL, V65 ALL, V75

Dimensions:
M10 x 1.25

Stainless steel M10 double banjo bolt for aluminium coloured brake manifolds only, used with front yoke mounted splitter on some small twins

Supplied with 3 crush washers

This part is available by special order, request a quote

95990034 GU95990034 95 99 00 34
9599 0034 9599.0034 95.99.00.34

£7.20

INC VAT

£6.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 5 of 8

1 2 3 4 5 6 7 8